Commercial Food Dehydrator
The commercial food dehydrator AirFlow 650 can hold approximately 600 pounds of beef sliced at 1/4 inch thickness, to make beef, chicken jerky, fish jerky or any other meat products.
With this capacity : It is said by some of our customers that the AirFlow 650 can process approx. 4 million dollars in beef jerky per year.
Our AirFlow 650 commercial food dehydrator can also dehydrate approximately 1200 pounds of sliced fruits and vegetables, herbs, pet treats to name a few. This dehydrator is a high quality dehydrator system and an excellent choice for dehydrating almost anything.
How this commercial food dehydrator works:
This AirFlow 650 dehydrator has two powerful heavy duty energy efficient fans that circulates the air many times throughout all the trays to assure even air distribution through all the trays. Our exhaust fan is a high quality Germany made with an EC motor that is 100% speed controllable. This exhaust fan controls how much fresh air enters the dehydrator as the humid air is vented out the exterior of the building. Whether you are dehydrating meats to make jerky, dehydrating fruits or vegetables this dehydrator combined powerful 39,200 watt heater will get the job done quickly, saving you time and money.
The Interior and side panel
The AirFlow 650 is also energy efficient it uses two 85.5% energy efficient motor circulation fans. It uses a commercial temperature controller that will turn the heaters off and on once your desired temperature has been reached. Also our AirFlow 650 food dehydrator is fully insulated resulting in saves energy due to low heat losses.
Most importantly, we also offer a lethality cycle step, this is a very important step when making beef jerky. This cycle kills off bacteria, with temperature and high humidity in the dehydrator for a given time before any dehydration takes place. Once you reach the set temperature and humidity for a period of time, you simply flip a switch, this will open the damper and turn the exhaust fan and the wet humid air will be vented out of the building.
FEATURES/BENEFITS
- 3 phase load center
- Commercial / Industrial Temperature controller, turns heaters on and off once your set temperature has been reached
- Digital timer turns off the machine at your set time
- #2 Heavy Duty electric 19,600 watt heater coils, 39,200 watt total for a faster process (Lethality cycle) or cook time and dry time
- Heavy duty solid state relays
- #2 – Heavy duty 1 HP Premium 85.5% Efficient electric motors, with extra-large ball bearings for long service life
- #1 Heavy duty exhaust fan with energy efficient EC motor is 100% speed controllable
- Potentiometer to control exhaust fan motor speed
- #1 Heavy duty electric damper closes during the lethality cycle and opens during the dehydration cycle
- Precision ground drive shafts
- Heavy Duty Stainless Steel ball bearings with food grade grease
- All Stainless steel bolts and screws
- Heavy Duty stainless steel hinges
- Heavy duty stainless steel commercial latch
- #5 – Heavy Duty NSF racks
- #200 – Heavy Duty stainless steel grilles
- Frame: Heavy Duty 6061 T6 Aluminum with welded joints
- Floor Fabrication: Heavy Duty Aluminum 6061 ribs with welded joints welded to a heavy duty 3/16” thick Aluminum plate floor
Insulation
- Floor Insulation: 2 inches of Polyisocyanurate insulation
- Wall insulation: 2 inches of Polyisocyanurate insulation
- Ceiling insulation: 2 inches of Polyisocyanurate insulation
- Ceiling insulation: 2 inches of Polyisocyanurate insulation.
- HOBO USB Micro Station data logger, logs humidity data that can be downloaded to your computer
- Smart Sensor
- HOBO ware
- USB Cable
- Electric damper
- Transformer and switch to power electric damper
- MADE IN USA
To read testimonials, go to the bottom of the home page. Click Here!